PROSON
This particular Fender Prosonic was made in 1997 and has all original parts. The 60W Prosonic with two 10” custom Celestion speakers was designed by tone legend Bruce Zinky and has some similar features as a Mesa / BOOGIE amp. This amp can go from classic sparkling Fender cleans all the way to classic hard rock grind. Some say this may be one of the best Fender amps ever made. But we’ll let the captures do the talking!
TONEX
QUAD CORTEX
NAM
OVERVIEW
25 Captures
ToneX V2 “Extended Training”
Quad Cortex V2
Voiced for Humbuckers & Single Coils
Head Captures & IRs Included
MICS & PREAMP
I made a custom head cabinet for the amp portion of this all original 2X10 combo amp so that I could effectively place the cab in another room while capturing for the purest and easiest way to dial in tone. The 2X10 combo cab is all original and holds the original Celestion made custom shop speakers voiced for this amp.
For these captures I used a single Shure 545 placed traditionally in between the center and the edge of the speaker.
CABINET & SPEAKERS
GAIN STAGES
1 - Clean
2 - Edge of Breakup
3 - Crunch
4-6 - Overdriven
CAPTURES
-
Captured with the new TONEX V2 Modeler set to “Extended Training” for the highest quality possible. All V2 captures, no matter the manufacturer, are perfectly in phase (polarity) with each other and have the same amount of latency. I also made sure all of my V1 captures are in polarity with the new V2 captures so you can mix and match if you wish. See this video for details.
*For all V2 captures, set Input Trim to 0db
Brighter (Humbuckers)
TS PROSON HB CS10 V2 – 1
TS PROSON HB CS10 V2 – 2
TS PROSON HB CS10 V2 – 3
TS PROSON HB CS10 V2 – 4
TS PROSON HB CS10 V2 – HEAD 1
TS PROSON HB CS10 V2 – HEAD 2
TS PROSON HB CS10 V2 – HEAD 3
TS PROSON HB CS10 V2 – HEAD 4
Warmer (Single Coils)
TS PROSON SC CS10 V2 – 1
TS PROSON SC CS10 V2 – 2
TS PROSON SC CS10 V2 – 3
TS PROSON SC CS10 V2 – 4
TS PROSON SC CS10 V2 – HEAD 1
TS PROSON SC CS10 V2 – HEAD 2
TS PROSON SC CS10 V2 – HEAD 3
TS PROSON SC CS10 V2 – HEAD 4
Impulse Responses (IRs)
TS IR PROSON HB CS10 545SD 48kHz
TS IR PROSON HB CS10 545SD 96kHz
TS IR PROSON SC CS10 545SD 48kHz
TS IR PROSON SC CS10 545SD 96kHz
-
STANDARD
Primarily voiced for humbuckers but your mileage may vary! So don’t hold back on throwing your single coils into these captures.
TS PROSON 1 - G10V
TS PROSON 2 - G10V
TS PROSON 3 - G10V
WRM
Primarily voiced for single coils with a warmer voicing. Made specifically to pair with my AC30 WRM captures.
TS PROSON WRM 1 - G10V
TS PROSON WRM 2 - G10V
TS PROSON WRM 3 - G10V
TS PROSON WRM 4 - G10V
TS PROSON WRM 5 - G10V
TS PROSON WRM 6 - G10V
-
FAVS
You’ll see a folder called “FAVS” which is where I will include my favorite captures from each pack. These are carefully dialed in to pair well with all the other FAVS and also represent my favorite captures of each pack. When importing these, please use the “Preset” NOT the “Tone Model”. When importing a “Preset” in your TONEX, it imports my preferred EQ/Gain/Volume settings which is very important if you plan on pairing this with other FAVS from other amp packs. The “Tone Model” is the base capture with no EQ tweaks and will not match perfectly with the others. See my HB FAVS VOL 1 video.
TS FAVS HB – PROSON V1
TS FAVS HB – PROSON V2
Other
TS PROSON 1 - G10V - TCAT
Voiced to pair with the Tone Cat
Available for ToneX and QC
TS PROSON 1 - G10V - EQ
This takes my original capture and just adds some EQ to take away some lows and mids. There’s a similar preset for the AC30 that this pairs well with.
Only available for ToneX as it’s not a unique capture, but simply a preset with EQ applied. You can apply the same kind of EQ in the QC if you’d like. Simply lower the Bass to -3 or -4 and the Mids to -1 or -2.
PAIRINGS
TS FAVS HB - AC30 V2
TS FAVS HB - PROSON V2
Artist: Devan Bumstead
Guitar: Jennings Voyager with Crema/Grinder Pickups
Rig: Analog Board with ToneX
TS MCLUB 1 - G12M
TS PROSON 1 - G10V
Artist: Aaron Sanchez
Guitar: Jazzmaster with McNelly JM 46/58 Pickups
Rig: Analog Board with ToneX
TONEX
QUAD CORTEX
NAM